high carbon steel tube
"
أنبوب فولاذي من سبائك النيكل NS3306 ASTM B444 Inconel 625 للاستخدام الصناعي
Nickel Alloy steel tube NS3306 ASTM B444 Inconel 625 Applications: For industry use Technique: Cold Drawn Alloy or not: Alloy Secondary or not: Non-Secondary Steel Grade/Steel Material: UNS N06025 NS3306 2.4856 Inconel 625(SMC) Size range: O.D. 6-219mm W.T. 1.0-12.7mm Length max 12000mm Characteristic: Good concentricity Good OD and ID tolerance High Precision Stable quality Smooth Roughness TORICH QUALITY ASSURANCE Chemical Composition: Grade C Si Mn P S Cr Ni Mo Al Other
ASTM A513 1.75 120wall أنبوب فولاذي DOM
A513 1.75 120wall dom tubing ASTM A513-5 steel pipes produced by DOM production Method. Quick detail: Standard :DIN 2393 EN10305 ASTM A519 GOST 5005 -82 DIN2394 JIS-G3445 DIN2391 BS6323 GOST8734-75 IS3074 ASTM A513 Material:St37.2 St 44.2 St52.3 etc Delivery condition:NA,No heat treatment Material St37.2 St 44.2 St52.3 etc Production method Welded precision Delivery condition BK,BKW,BKS,GBS,NBK Test DIN 2393 Decription: Straightness ≤0.5mm/1m Roundness ≤0.5 OD range:15-200mm
OD21.7mm 304L 316L دوبلكس 2205 أنبوب فولاذي دقيق
Torich 304 304L 316L Duplex 2205 2507 Welded Stainless Steel Tube Pipe Type: Stainless, Grade: TP304,TP304L, TP316,TP316L, TP321 1.4301 Technical: welded Usage: Petroleum&Chemical industry Size: OD: 6.25-254mm WT: 0.5-12mm QUALITY CONTROL: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Drawing and Cold Rolling, on line inspection 5. Heat Treatment, +A, +SRA, +LC, +N, Q+T 6.
12000 مم طول S32750 2205 أنبوب مزدوج من الفولاذ المقاوم للصدأ
Torich UNS S32205 S31803 S32750 2205 Duplex Stainless Steel Tube Type: Stainless, Grade: TP304,TP304L, TP316,TP316L, TP321 1.4301 Technical: welded Usage: Oil, Petroleum&Chemical industry Size: OD: 6.25-254mm WT: 0.5-12mm QUALITY CONTROL: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Drawing and Cold Rolling, on line inspection 5. Heat Treatment, +A, +SRA, +LC, +N, Q+T 6.
15CrMo ASM SA789 أنبوب مزدوج من الفولاذ المقاوم للصدأ
15CrMo asm sa789 duplex stainless steel tube Applications: For chemical , boiler industry, construction Technique: Cold worked and hot worked Alloy or not: Alloy Secondary or not: Non-Secondary Steel Grade/Steel Material: Material 200 series: 201, 202 300 series: 304, 304L, 304H, 310S, 316, 316L, 317L, 321,310S,309S,2205,2507,2520 400 series: 410, 410S,420, 430, 431, 440A,904L Size range: O.D. 8-530mm W.T. 0.5mm-30mm Length max 12000mm Characteristic: Good concentricity Good
JIS G3459 أنبوب فولاذي مقاوم للصدأ ملحوم وغير ملحوم لخدمة الضغط
JIS G3459 Seamless and welded stainless steel tube for pressure service Applications: For pressure service,hign and low temperature service Technique: Cold worked and hot worked Alloy or not: Alloy Secondary or not: Non-Secondary Steel Grade/Steel Material: SUS304TP SUS310TP SUS316TP SUS317TP SUS347TP etc Size range: O.D. 4-305mm W.T. 1-50mm Length max 12000mm Characteristic: Good concentricity Good OD and ID tolerance High Precision Stable quality Smooth Roughness TORICH
BS 6323-4 CFS3 الأنابيب الفولاذية الخالية من اللحام المنتهية باردة 6-280mm OD
BS 6323-4 CFS3 Cold Finished Seamless Steel Tubes For Automotive Industry Material Carbon steel cold-finished seamless tubes, manufactured according to the BS 6323-4 standard (Part 4), specifically for automotive, mechanical, and general engineering uses. Specifications Standard: BS 6323-4, Part 4 – cold-finished seamless tubes Seamless cold finishing; residual lubricant permissible unless specified Delivery conditions: BK (hard), BKW (soft), GBK (annealed), GZF (annealed &
EN10305-2 ملحومة الدقة الباردة مرسومة دوم الصلب أنبوب لدراجة نارية لامتصاص الصدمات
EN10305-2 DOM Pipe for Motorcycle Shock Absorbers EN10305-2 Welded Precision Cold Drawn Steel Tubes Applications: for Auto industry/for machinery use/Oil Cylinder Tube/Motorcycle shock absorber Auto shock absorber inner cylinder/Telescopic Cylinders Size range: O.D.:6-350mm W.T.:1-35mm L:max12000mm Characteristic:High precision with smooth ID tolerance and roughness Steel Grade and Chemical Compositions Steel Grade C Si Mn P S Steel name Steel number max max max max max E155
العرف 20G 20MnG 25MnG سلس أنابيب الصلب للحصول على ارتفاع ضغط المرجل GB 5310
Seamless Steel Tubes and Pipes for High Pressure Boiler GB 5310 Spec: Material:20G 20MnG 25MnG Size Range:OD:4-1200mm WT:0.3-200mm General Length:4-12.5m Tolerance: According to the following tables or customers’ request. Producing method Size Tolerance General High grade Hot rolling (extrude) D 54~325 S≤35 ±0.75% ±0.5% S>35 ±1% ±0.75% >325 ±1% ±0.75% S ≤4.0 ±0.45 ±0.35 >4.0~20 ±12.5%-10% ±10% >20 D25.4~40 ±0.20 _ >40~50 ±0.25 _ >50~60 ±0.30 _ >60 ±0.5% _ S ≤3.0 ±0.3 ±0.2 &g
