welding steel tubing
"
أنابيب الفولاذ المقاوم للصدأ الملحومة التي تعمل على البارد بشدة TP304 TP316 SA312
Welded Heavily Cold Worked Stainless Tubes Steel Pipes TP304 TP316 SA312 Torich International Limited is a professional manufacturer and exporter of steel pipes. Our main products are stainless steel tube,The material we usually use for producing heavily cold worked stainless steel tube is TP304,TP316,TP304H,TP309H,TP310H,TP321H,ect.and we have many experience in exporting welded stainless tubes. Application:high temperature,chemical industy,mechanical equipment,ect Standard
الملحومة الأوستنيتي الفولاذ المقاوم للصدأ الأنابيب الصحية مع سطح تلميع
TORICH A270 Welded Austenitic Stainless Steel SanitaryTubing Standard: ASTM A 262, A480/A480M, A1016/A 1016M, A923, A967, E527, SAE J1086 OD: 20-304.8mm WT: 0.4-8.1mm Usage: This standard is applicable to Welded Austenitic Stainless Steel Tubes for SanitaryTubing Production process: Welded tube can be produced by Heat Treatment. Note: Special steel grade is also available, according to customer request. CHEMICAL REQUIREMENTS No. UNS Designation Steel Grade Carbon, max
ارتفاع ضغط أنابيب الصلب غير الملحومة لهيكل / أكسسوارات والبناء
4130 Carbon Steel Seamless Pipe Size: OD: 13.7 – 711mm. Wall Thickness: 1.0 – 40mm. Length: 3-12m or according to clients` requirements. Standard : ASTM A53,BS1387-85,GB/T3091-08,JIS-G3444 Usage: Used For Structure, Accessorize And Construction Ends 1) Plain 2) Beveled 3) Thread End protector 1) Plastic pipe cap 2) Iron protector Coatings PE; 3PE; FBE; black varnish; anti rust oiled; beveled or plain ends; plastic end caps Technique Hot rolled/cold rolled Test inspections
ASTM A106-2006 Q195 Q235 المجلفن الصلب الأنابيب الفولاذية للمواد
Galvanised Q195 Q235 Square Steel Pipe Size OD : 20~406mm(1/2inch~16inch) in theory Thickness : 1.2~15.7mm Length : Any Length Below 16 Meter Standard : GB/T3091-2008 ASTM A53 BS1387 BS EN39 ASTM A500 BS 4568 BS EN31 Material Chinese Grade: Q215 Q235 According to GB/T700;Q345 According to GB/T1591 Foreign Grade : ASTM Grade B,Grade C,Grade D,Grade 50 EN S185,S235JR,S235JO,E335,S355JR,S355J2 JIS SS330,SS400,SPFC590 Usage Used For Water, Gas, Stream, Combustible Fluids And
A270 SUS304 76.2 * 2mm مرآة تلميع الفولاذ المقاوم للصدأ أنابيب الصلب الملحومة الدقة
A270 SUS304 76.2*2mm Mirror Polishing Stainless Steel Welded Precision Steel Tube TEST: 100% PMI, Spectro Chemical Aanlysis Test for Raw Material;100% Hydrostatic Test or 100% NON-DESTRUCTIVE Test; Description : Finish: Annealed & pickled, bright annealing, polished Size range for tube:OD 1/4" to 80" (6mm to 2000mm),THk 0.02" to 2" (0.5mm to 50mm) Material: TP321 SUS321 AISI321 UNS S32100 1.4541 X6CrNiTi18-10 08X18H10T, TP316/316L/316H, 304/304L/304H, 321/321H, 317/317L,
20MM مشرق صلب الفولاذ المقاوم للصدأ أنبوب ASTM A269 TP304 / 304L TP316 / 316L
20mm Bright Annealed pipe Stainless Steel Tubing ASTM A269 TP304/304L , TP316/316L Size range: O.D.: 4.0-760mm W.T.:1-50mm L: according to customer requirement Manufacture: The tubes are made by seamless or welded process. The tubeing can be hot finished or cold finished Heat treatment: All tubes are furnished in the heat-treated condition Mechanical Tests Requirement: Flaring Test (Seamless Tubes) Flange Test (Welded Tubes) Hardness Test Hydrastatic or Nondestructive
ASTM B167 NiCr15Fe NC15FE NO6600 أنبوب فولاذي غير ملحوم من سبائك الصلب
ASTM B167/5580 INCONEL 600 NiCr15Fe NC15FE NO6600 High Nickel High Strength Seamless Alloy Steel Tubes Inconel 600 is a nonmagnetic nickel-chromium alloy with excellent resistance to oxidation and other forms of high temperature corrosion. This alloy also has excellent mechanical properties and presents desirable combination of high strength and good workability. Used for furnace and chemical-treatment components, in food processing, in nuclear engineering, and for engine
SAE J356 ملحومة فلاش تسيطر عليها أنابيب فولاذية منخفضة الكربون 15.88 مم OD
15.88 mm OD X 1.24 mm Type -A J356 Welded Flash-Controlled Low-Carbon Steel Tubing Normalized for Bending, Double Flaring, and Beading This SAE Standard covers normalized electric-resistance welded flash-controlled single-wall low-carbon steel pressure tubing intended for use as pressure lines and in other applications requiring tubing of a quality suitable for bending, flaring, beading, and brazing. Material produced to this specification is not intended to be used for
4 مم مشرق الفولاذ المقاوم للصدأ أنبوب سلس ASTM A269 TP304 TP316
4mm Bright Annealed Stainless Steel Tube ASTM A269 TP304 TP316 Size range: O.D.: 4.0-760mm W.T.:1-50mm L: according to customer requirement Manufacture: The tubes are made by seamless or welded process. The tubeing can be hot finished or cold finished Heat treatment: All tubes are furnished in the heat-treated condition Mechanical Tests Requirement: Flaring Test (Seamless Tubes) Flange Test (Welded Tubes) Hardness Test Hydrastatic or Nondestructive Electric Test Surface
