أنبوب سبائك النيكل

Alloy Monel 400 Nickel Alloy Pipe Different Standard Monel 400 UNS N04400 DIN W. Nr. 2.4360, 2.4361 Chemical composition: Ni: 63.0 MIN Cu: 28.0-34.0 Fe: 2.50 MAX C: 0.30 MAX Mn: 2.00 MAX S: 0.024 MAX Si: 0.50MAX Physical properties: Density: 8.80g/cm3 Melting range: 1300-1350℃ Metallographic structure of Monel 400: The structure of Monel400 alloy is a high - strength single - phase solid solution. Corrosion resistance of Monel 400: Monel400 alloy has excellent corrosion

Inconel 625 Tubes Sans Soudure for Heat Exchanger Nickel and Nickel alloy referred to the alloy’s main elemental contents of Ni, Cu, Cr, Fe and Mo. Those all characterized by its combination performance of high corrosion resistance and heat ability at temperature 650 ~ 1000 °C. According to main alloy elements content can divide: Ni –Cr – Mo alloy (Inconel 600 Series) Ni-Cr-Fe alloy (Incoloy 800 Series) Ni - Mo – Ni – Cu – (Hastelloy Series) Pure Nickel and low alloy nickel

Inconel 718 Nickel Alloy tube 1mm Alloy 718 has excellent corrosion resistance to many media. This resistance, which is similar to that of other nickel-chromium alloys, is a function of its composition. Nickel contributes to corrosion resistance in many inorganic and organic, other than strongly oxidizing, compounds throughout wide ranges of acidity and alkalinity. It also is useful in combating chloride-ion stress-corrosion cracking. Chromium imparts an ability to withstand

Inconel 600 718 825 Tubing Pipe Outer Diameter : 3.18mm-101.60mm Wall Thickness : 0.50mm-20.00mm Length :Normally fixed length 6m, can as per customer’s requirement Standard : ASTM B163; ASTM B167; ASTM B444; ASTM B622 ect Material Grade : Alloy 800 / 800H / 800HT, Alloy 625/UNS N06625, Alloy 600/UNS N06600, Alloy601/UNS N06601, Alloy 800/UNS N08800, Alloy 825/UNS N08825, Alloy400/UNS N04400; etc Application Chemical and petrochemical process piping heat exchangers furnace

625 Exhaust Inconel Alloy Tube Pipe Inconel 600 (UNS N06600, DIN W. Nr. 2.4816) Inconel 601 (UNS N06601, DIN W. Nr. 2.4851) Inconel 617 (UNS N06617, DIN W. Nr. 2.4663A) Inconel 625 (UNS N06625, DIN W. Nr. 2.4856) Inconel 718 (UNS N07718, DIN W. Nr. 2.4668) Inconel X-750(UNS N07718, DIN W. Nr. 2.4668) Commodiy hot selling inconel 600 inconel 625 nickle pipe / inconel 625 tube prices Standard ASTM, JIS, DIN, EN, GB Material Ni200,inconel 625,N4,N6,N7,N8 OD 1 1/2'- 24' 48.3mm

Inconel Alloy 625 600 Pipe 20 inch Inconel 600 with high nickel content, is virtually immune to chloride-induced stress corrosion cracking. The alloy has superb corrosion resistance to caustic environments. Inconel Alloy 600 also demonstrates resistance to dry chlorine up to 538°C. They are available in a wide range of formats including wire, plate, sheet, strip,pipe, fittings, bar, flanges, and so on. Inconel Alloy 600 Inconel Alloy 600 has good resistance to corrosion and

Inconel 600 601 625 718 825 Seamless Tubing Inconel 600 with high nickel content, is virtually immune to chloride-induced stress corrosion cracking. The alloy has superb corrosion resistance to caustic environments. Inconel Alloy 600 also demonstrates resistance to dry chlorine up to 538°C. They are available in a wide range of formats including wire, plate, sheet, strip,pipe, fittings, bar, flanges, and so on. Inconel Alloy 600 has good resistance to corrosion and high

Inconel 625 exhaust tubing Inconel 625 is a kind of alloy with density of 8.4 g / cm3, melting point of 1290-1350 ℃, excellent resistance to inorganic acid corrosion, and excellent corrosion resistance to various corrosive media in oxidation and reduction environment. 625 alloy shows excellent corrosion resistance in many media. It has excellent resistance to pitting corrosion, crevice corrosion, intergranular corrosion and erosion in chloride medium. Equivalent Grade GB/T

ASTM B444 Inconel Alloy 625 Seamless Pipe and Tubing Inconel 625 is a corrosion and oxidation resistant nickel alloy for its high strength and excellent water-based corrosion resistance. Its excellent strength and toughness are due to the addition of niobium, which together with molybdenum hardens the matrix of the alloy. Inconel 625 is a kind of alloy with density of 8.4 g / cm3, melting point of 1290-1350 ℃, excellent resistance to inorganic acid corrosion, and excellent