قطع غيار الآلات باستخدام الحاسب الآلي
DN15 DN6000 الفولاذ المقاوم للصدأ شفة التصنيع باستخدام الحاسب الآلي
DN15-DN6000 S220503 Stainless Steel Blind Flange Quick detail: Material : Q235,201,S30408,S30403,S32168,S31603,S3108,S22053 Size: 1/2”~240" (DN 15mm-DN 6000mm) Company products: Stainless steel non-standard flange can be customized witha variety of material non-standard flange. Produce method: Raw ...
معالجة بالزيت ASME B16.5 شفة مسطحة الوجه مطلية بالزنك
ASME B16.5 Flat Face Flange Applications that require the use of flat face flanges are frequently those systems where the mating flanges or flanged fitting is produced from a casting. The ANSI B16.5 standard is limited to those flanges and their corresponding fittings which are generally made from ...
ASME B16.5 سطح مزيت ذو رقبة طويلة وشفة غير سبيكة
ASME B16.5 Long Weld Necks Flange Long Weld Necks(LWN), also commonly referred to as Nozzles, typically are made with square cuts to replace pipe, not to be welded up to pipe. Due to this, long weld necks do not have schedule bores. A typical weld neck flange has a weld prep at the tip of the neck ...
DN15304 الفولاذ المقاوم للصدأ الأنابيب الملولبة الشفاه مكافحة الصدأ النفط
1/2 inch Threaded Class 150 304 Stainless Steel Flanges Threaded pipe flanges are similar to slip-on pipe flanges except the bore of threaded pipe flange has tapered threads. Threaded pipe flanges are used with pipes that have external threads. The benefit of these pipe flanges is that it can be ...
DN5000 معالجة مزيتة شفة عمياء مترابطة بدون سبيكة
ASME B16.47 150# SERIES "A" Blind flange Blind flanges: The simplest, most straight-forward flange in design, a blind flange is a solid disk used to block the end of a pipe. It’s anomalous in that most flanges are open in the center, allowing the contents of the pipe to move through it. Sometimes, ...
ASME B16.5 غير سبيكة لحام الرقبة شفة الكربون الصلب
ASME B16.5 Welding Neck Flange The ASME B16.5 welding neck flange shall be furnished with cut square end when wall thickness is less than 5 mm, plain bevel end when wall thickness is from 5 mm to 22 mm inclusive, or compound bevel end when wall thickness is greater than 22 mm. The butt welding ends ...
يتأهل ASTM A105 الكربون الصلب الانزلاق على الشفاه JIS 10K
ASTM A105 for carbon steel slip on flanges Slip on flange, also called SO flange. It's a kind of flange slides over the pipe with internal design is slightly larger than the pipe. Since the inner diameter of the flange is slightly larger than the outer diameter of the pipe, the SO flange can be ...
ANSI 1200NB Socket Weld أنابيب فلنجات معالجة السطح بالزيت
ANSI/ASME B16.5 Socket Welding Flange Socket weld flange is similar to the slip-on flange in outline, but the bore is counter-bored to accept pipe. Socket welding pipe flanges are typically used on smaller sizes of high pressure pipes. Socket weld flanges are widely used in high pressure systems ...
انزلاق السطح الأملس باستخدام الحاسب الآلي على شفة اللوحة A350 A182 PN20 PN50
A350, A182, PN20, PN50 Smooth Surface PL DN250 PN10 S235JR Slip On Flange Plate Flange Flanges Dimention Technical Standard HG20592,ASME B16.5,DIN2630WN,JIS2220PL,ASTM A182 etc Steel Grade Stainless Steel: 304,316,316Ti,321 347 Alloy Steel: F11,F22,F91,F5,F9,F51 Duplex Stainless Steel :F51,F53,F55...
